It is very important to measure the door of the room and do it correctly. Because these products are made and produced according to the dimensions that you provide us. Therefore, we suggest that you leave the measurement to us, because the manufactured door cannot be exchanged or returned in any way. The important thing about measuring is that the type of door, whether waterproof, melamine or HDF, has no effect on the measuring model. Since every installer writes the dimensions according to his experience and calculates the windage, it is better that the same installer does the installation so that you don't face any problems.
Steps and how to measure the room door
Before measuring the door of the room, the frame must be installed in place, and if you intend to change the frame, measure it afterwards, and the important thing about these products is whether it is left-opening or right-opening. It is not important to be in the right size because the handle and lock will be replaced by our installer on the spot. About writing the dimensions of the width of the frame, be careful that you must do it from the inside, because the frame has a larger gap on one side than on the inside. When writing the dimensions of the height, always make sure that you consider the maximum height.
Another important point in measuring the door of the room is the windproof door. What is meant by windage is that when we want to open and close the door, it has enough space to open and close, because these dimensions may change a little after installing the hinge, and when the door is opened, there is always a gap. It is very little to the wall, and this distance is called Bad Khor. Now you can remember the standard dimensions of your door. We suggest that you read the article about interior doors to better understand the concepts of this page. And the last point is that you should be careful in writing the dimensions and do two series of measurements to make sure of the remembered dimensions.
High accuracy in measuring the door
Since your dimensions are not accurate, the door will not be installed in the place of the frame, and in waterproof models, like the frame itself, resin is applied to the door to make it waterproof. If you feel that you have not acquired enough skills to measure the interior door, do not do this. After placing your order, Tida Decor Group will send the installer to the installation site with the sample, and this fee will be refunded after you place the order with our group, so we suggest measurement and installation. Leave it to our experienced team.
Source :